ISLAND BACK SIDE BURNER CABINETS

Side Burner base cabinets with a width of 15" to 24" include 4 ventilation outlets to allow the release of possible heat or gas buildup.

1 in the toe kick panel
1 in the base shelf
2 loose, to be used on the exterior of the base cabinet at the end of a cabinet run. Placement will be high or low depending on the type of gas (LP vs. NG)
Side Burner base cabinets with a width of 30" include 6 ventilation outlets to allow the release of possible heat or gas buildup.

2 in the toe kick panel
2 in the base shelf
2 loose, to be used on the exterior of the base cabinet at the end of a cabinet run. Placement will be high or low depending on type of gas (LP vs. NG)
Side Burner Single Door Base
  • The face plate is modified in field to accept the respective heat liner used with the side burner
  • 3/4" All-Weatherboard™ composite material cabinet construction
  • Fully integrated back panel for installation
  • Includes 4 'Sure Level' polymer legs, shipped loose for field installation and leveling
  • Available in all door styles and finishes
  • Separate toe kick with vent included
  • Stainless steel handles sold separately
Please Note: All built in side burners require an insulated jacket. Please consult your side burner manufacturer for the appropriate model.
Item Number Width Depth Height Back
SBB15LIB 15 27 34.5 Full
SBB15RIB 15 27 34.5 Full
SBB18LIB 18 27 34.5 Full
SBB18RIB 18 27 34.5 Full
SBB21LIB 21 27 34.5 Full
SBB21RIB 21 27 34.5 Full
Side Burner Double Door Base
  • The face plate is modified in field to accept the respective heat liner used with the side burner
  • 3/4" All-Weatherboard™ composite material cabinet construction
  • Fully integrated back panel for installation
  • Includes 4 'Sure Level' polymer legs, shipped loose for field installation and leveling
  • Available in all door styles and finishes
  • Separate toe kick with vent included
  • Stainless steel handles sold separately
Please Note: All built in side burners require an insulated jacket. Please consult your side burner manufacturer for the appropriate model.
Item Number Width Depth Height Back
SBB24IB 24 27 34.5 Full
SBB30IB 30 27 34.5 Full
Grill and side burner cabinets are manufactured with two full upper face plates that will need to be field modified to accept the respective heat liner used with the gas grill or side burner.

The second matching panel will be shipped loose for ease of modification and installation. It can be attached with stainless steel screws or a suitable construction grade adhesive. Under no circumstance should a grill or side burner be installed without the appropriate heat liner specified by the manufacturer of the appliance.